Maintenance of circular knitting machine accessories

A. The replaced syringe and dial should be cleaned, coated with engine oil, wrapped in oil cloth, and placed in a wooden box to avoid being bruised and deformed. When using, first use compressed air to remove the oil in the syringe and needle plate. After installation, add knitting oil before use.

B. When changing designs and varieties, the replaced triangles need to be stored in categories (knitted, tucked, floating) and knitting oil added to prevent rust.

C. New knitting needles and sinkers that have not been used up need to be put back into the original packaging bag (box); knitting needles and sinkers that are replaced when changing designs and varieties must be cleaned with oil, inspected and picked out for damage. , put them into boxes by classification, and add knitting oil to prevent rust.

Maintenance of electrical system of circular knitting machines

The electrical system is the power source of circular knitting machines and must be regularly and strictly inspected to avoid malfunctions.

A. Always check whether there is any leakage on the equipment. If found, it must be repaired immediately.

B. Check whether detectors everywhere are safe and effective at any time.

C. Check whether the switch button is malfunctioning.

D. Check and clean the internal parts of the motor and lubricate the bearings.

E. Check the wiring for wear and breakage.

Maintenance of other parts of circular knitting machine

frame

A. The oil in the oil glass of the large plate should reach the oil level. It is required to check the oil level every day and keep it between the highest oil level and the lowest oil level. When refueling, unscrew the oil filling hole screw and add oil to the specified level while turning the machine. Just the location.

B. The upper transmission gear (oil-stained type) needs to be lubricated once a month.

C. To make the oil in the oil mirror of the cloth box reach the oil mark, lubricating oil needs to be added once a month.

Cloth rolling machine

Check the oil level of the cloth rolling machine once a week and add oil according to the oil level. In addition, add grease to the chain and sprocket according to the situation.